Electrical Repair in Los Angeles, Fixture by Fixture
Fans, fixtures, outlets, switches, and smart home devices — installed and repaired without the wait for a full electrician's schedule.
You need small electrical jobs handled fast — a fan that won't spin, a switch that sparks, a fixture waiting to be hung. Fixture-level electrical work is the sweet spot: ceiling fans, light fixtures, outlets, switches, and smart home devices. If a job needs panel work or rewiring, we'll tell you and point you to a licensed electrician first. Book once, and you'll know what's fixable today and roughly what it'll cost you.
What we handle
- You can get a ceiling fan installed, swapped out, or rebalanced, plus bathroom exhaust fan installation and replacement when the old motor gives out.
- Chandeliers, pendant lights, vanity lights, and outdoor light fixtures all get hung, wired, and tested to match the look you picked out. That covers a statement piece over the dining table or a simple bathroom swap.
- You can add recessed lighting, track lighting, or under-cabinet lighting to brighten a kitchen, hallway, or living room without a full remodel.
- Your outlets get repaired or installed — standard, GFCI, or USB — along with light switch replacement and dimmer switch installation.
- Smart thermostat installation, smart home device setup, video doorbell installation, and Ring doorbell installation get your house running the way you want it.
- You get added visibility around entries, driveways, and backyards with security camera installation, tested and connected to your phone app before we leave.
- Your home's smoke detectors and carbon monoxide detectors get installed and kept current, so the safety basics stay covered even after years of missed battery swaps.
- You get motion sensor lights, security lights, and flood light installation to light up dark corners and entryways after sundown.
Common electrical jobs
Ceiling Fan Installation
ceiling fan replacement, bathroom exhaust fan installation, bathroom fan replacement
Light Fixture Installation
chandelier installation, pendant light installation, vanity light installation
Recessed Lighting Installation
track lighting installation, under cabinet lighting installation
Outlet & Switch Repair
outlet installation, gfci outlet installation, usb outlet installation
Smart Home & Thermostat Installation
thermostat replacement, smart home device installation, video doorbell installation
Safety Device Installation
smoke detector installation, carbon monoxide detector installation, motion sensor light installation
What it costs in LA
Simple electrical swaps — an outlet, a switch, a smoke detector — usually cost less than jobs that need new wiring or a fresh fixture location. Smart thermostat installation in LA typically runs $150–$450 depending on whether you supply your own thermostat or want one included. Bundling a few small jobs into one visit — say, two outlets and a dimmer switch — usually lowers the per-item cost. These are typical ranges, not a quote — NC Services will confirm your price after taking a look.
Questions homeowners ask
Are you licensed electricians?
No — this is insured handyman work, not a licensed electrical contractor. You'll get fixture-level jobs: fans, lights, outlets, switches, thermostats, and safety devices. Panel work, rewiring, or anything past fixture level isn't in scope, and you'll hear that upfront if your job needs it. A referral to a licensed electrician comes with that heads-up, so you're not left guessing who to call next. Insured coverage still applies to every fixture-level job on the visit.
Can you install a ceiling fan where there wasn't one before?
Yes, though a new fan location usually costs more than swapping an existing one. New wiring, a switch run, and sometimes a support brace are needed when there's no fixture there already. A straight fan-for-fan swap is quicker and less expensive since the wiring's already in place. Either way, the ceiling gets checked for proper support before the fan goes up, since a wobbly fan is a real safety issue. Bathroom exhaust fans follow the same swap-versus-new-location logic.
What light fixtures can you hang?
Chandeliers, pendant lights, vanity lights, and outdoor fixtures all fall within scope, along with recessed lighting, track lighting, and under-cabinet lighting. Heavier fixtures like chandeliers may need extra ceiling support, especially over a staircase or high ceiling. Simple swaps — replacing an existing fixture with a similar one — are the fastest, most affordable option. Moving a fixture to a new spot or running new wiring adds time and cost, since that's a small new installation. Either way, the fixture gets hung, wired, and tested before the job's done.
Do you fix outlets that don't work or feel warm?
Yes — a dead or warm outlet gets diagnosed and usually repaired or replaced on the spot. Standard outlets, GFCI outlets, and USB outlets are all covered, along with light switch and dimmer switch replacement. A warm outlet can point to a loose wire or overloaded circuit, both worth checking right away. If the issue traces back to the panel or a circuit-wide problem, that gets flagged before any further work, since it's outside fixture-level scope. Most outlet and switch jobs finish in one visit.
Can you install a smart thermostat or video doorbell?
Yes — smart thermostat installation, smart home device setup, video doorbell installation, and Ring doorbell installation are all standard jobs. Security camera installation is also covered for entries, driveways, and backyards. Existing wiring gets checked first, since a smart thermostat sometimes needs a C-wire that isn't already run. If a device needs a stronger Wi-Fi signal or app setup beyond installation, that part's on you, though the hardware install itself isn't. Most single-device installs finish in under an hour.
How fast can you install smoke and carbon monoxide detectors?
Most smoke and carbon monoxide detector installs finish in the same visit, especially when a few units go in together. Motion sensor lights, security lights, and flood lights follow the same quick-install pattern. Battery-powered units are the fastest option; hardwired detectors take a bit longer since they tie into existing wiring. Installing several detectors in one visit usually costs less per unit than a single one-off job. Working smoke and CO detectors are one of the most affordable safety upgrades for a home.
What if my electrical problem turns out to be bigger than expected?
That happens sometimes — a switch that sparks might trace back to a panel issue once the cover's off. You'll hear about it right away, with an honest explanation of what's outside fixture-level scope. A referral to a licensed electrician follows, so the bigger issue doesn't sit unresolved. Anything already completed on the visit — the parts within scope — still gets finished and tested before moving on. There's no pressure to sign up for work that isn't the right fit for a handyman visit.
Need electrical help in LA?
Tell us what needs doing and we'll follow up fast.